Industrial Security Filtration: Applications, Process Role and a 300 m³/h Case

Industrial security filtration is commonly used when a liquid requires additional particle control before a downstream process or sensitive piece of equipment.

Unlike a primary filtration stage that may handle a larger solids load, security filtration often serves as an additional barrier after upstream treatment.

A simple process concept is:

Primary filtration → Security filtration → Downstream process

The actual arrangement depends on the liquid and process requirements.

1. Water Treatment

In industrial water treatment, a security filter may be installed after upstream filtration and before RO, UF or other downstream equipment.

Its purpose is not to replace pretreatment, but to provide additional control of residual particles.

This can be particularly relevant when downstream membranes or equipment require more controlled feed conditions. In depth Reading: Industrial Security Filter for RO Systems

2. Seawater Treatment

Seawater desalination systems can also use additional filtration stages.

Because suspended particles can affect downstream membrane treatment, security filtration may provide another barrier before the membrane stage.

The exact filtration arrangement depends on the existing pretreatment system and seawater conditions.

3. Chemical Processing and Refining

Chemical and refining processes may involve multiple filtration stages.

A higher-capacity filtration stage can handle bulk solids first. A security filter can then provide additional particle control before the liquid reaches downstream equipment or processing.

This staged approach allows different filtration units to perform different jobs instead of relying on one filter for the entire solids burden.

4. Food & Beverage

Food and beverage filtration has both particle-control and hygienic requirements.

Security filtration can be used in applications involving beverages, bottled water, drinking water, beer and wine.

For these applications, the filtration system should be considered together with the process fluid, filtration target and hygienic requirements.

5. Power Generation

Power-generation facilities may use filtration in cooling-water, hydraulic and auxiliary systems.

Where an additional fine particle-control stage is required, security filtration can provide another protective barrier.

Not every power-generation process requires this stage. The decision depends on the process and downstream equipment.

A Food Processing Water Treatment Example

A YUBO food-processing project provides a practical example of staged filtration.

The plant used deep-well water containing solids from trace amounts to approximately 2%, with a treatment capacity of 300 m³/h.

The filtration system used two stages.

First, a YGDF self-cleaning filter removed particles larger than 25 μm.

The water then passed through an SSBF security filter for finer filtration.

The treated water reached 0.113 NTU turbidity, and initial and one-month samples met the specified requirements in third-party laboratory testing.

This illustrates an important principle:

A security filter does not necessarily need to carry the entire solids burden. It can work as a downstream filtration stage after higher-capacity filtration.

How Should a Security Filter Be Positioned?

Before adding a security filter, consider:

What is the incoming solids load?

What filtration already exists upstream?

What residual particles remain?

What equipment is downstream?

What level of particle control does that equipment require?

This process-based approach is generally more useful than selecting a security filter solely by micron rating.

More Application Examples

For a broader breakdown of industrial security filter applications, including water treatment, seawater treatment, chemical processing and refining, food & beverage and power generation, see: Industrial Security Filter Applications